The P-EG filter housings are dedicated for the treatment of compressed air and technical gases in industrial applications. Thanks to the optimized construction, they ensure low pressure drop at high flows. A big selection of housings with different connections allows optimal adaptation to the application parameters.

This series of products includes 18 different housings for a flow from 60 to 23040 Nm3 / h relative to 7 bar (g). The special combination developed by Donaldson ensures that the filter cartridges are securely attached at all times. Thanks to the modular structure, it’s possible to use various filter elements in this housing.- the filters can be adapted.

P-EG filter housing comply with the requirements set out in the Pressure Equipment Directive 97/23 / EC.

Benefits:

• High quality stainless steel construction
  Low pressure drop
  Different types of connections
  Flow from 60m3 / h to 23000m3 / h

Technical data sheet:

https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/emea/compressed-air-and-gas/filter-housings/process/p-eg/f119025/eng/P-EG-Filter-Housings.pdf

The PG-EG filter  housings are designed for the treatment of compressed air and other technical gases. In combination with various filter elements, Donaldson provides optimal solutions for the requirements of almost every application.

The individual PG-EG series consists of 6 different sizes of housings for workflows from 7.5 to 360m3 / h (at an absolute pressure of 1 bar).

Enclosures are equipped with three braces, additional connection types are available on request. The surface is electro-polished to Ra <0.8μm.

Benefits:

• • Electropolished Ra <0.8 μm
    The structure  of stainless steel 1.4404
    The structure complies with the regulations:
    The FDA CFR Code of Federal Regulations Title 21
    Directive of pressure equipment 97/23 / EC
    3-A sanitary standards (Superplus version) for USA
    Frame regulation 1935/2004 / EC

Technical  data sheet:
https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/emea/compressed-air-and-gas/filter-housings/process/pg-eg/f119030/eng/PG-EG-Filter-Housings-0006-to-0192.pdf

Filter housing for aerating and venting sterile storage tanks and containers for transport.

The aeration and venting filters from the P-BE ventilating product series are designed to provide 100% sterility when storing pharmaceutical products, containers with distilled water, food, chemicals, and / or de-aeration of fermentors.

The user-friendly two-piece housings have splash protection to prevent liquids from entering the filter medium and thus damage it.

A wide range of housing sizes help to adapt the filter exactly to the application. There are 12 sizes of housings for different flow rates from 4.5 to 2.010 m3 / h at 1 bar. Thanks to the Donaldson-Ultrafilter modular solution in the housing, various types of cartridges can be used.The filters includes sterile plumbing filters and hydrophobic polypropylene or Teflon membrane filters with a degree of filtration up to 0.01μm.

More on:
https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/emea/compressed-air-and-gas/filter-housings/process/p-be-tank-vent/f119024/eng/P-BE-Filter-Housings.pdf

The (P)-PF-PP filter element is an absolute rated, pleated high performance Polypropylene membrane filter. It provides the greatest assurance of filtration performance, stability and durability against chemicals even under severe
process conditions. The (P)-PF-PP filter element offers a cost effective alternative to PTFE membrane filters with similar performance and durability range against chemicals.

The all Polypropylene filter medium is quite hydrophobic with a highly porous membrane structure. This ensures high flow rates and a high absorption of particles during the entire service life time. The end caps and the Polypropylene
membrane are thermally welded without the use of binders. This results in an integral filter element which provides maximum durability range against
chemicals with minimal extractables.

This extremely durable design maintains consistent porosity and impurity retention throughout its service life without shedding or unloading contaminations.

All components meet the EU and USA requirements for Food Contact Use in
accordance with CFR (Code of Federal Regulations) Title 21 and 1935/2004/EC. (P)- PF-PP has passed the USP Class VI tests for plastics. The filter element is manufactured in accordance with the manufacturing requirements, has no migration of filter media, is non-fibre releasing and is thermally welded without the use of binders or other chemical additives.

Advantages:

• Extremely durable polypropylene construction
  Absolute accuracy 0.2 μm (HIMA / ASTM)
  Large flow values
  Biologically indifferent
  Confirmed intended use for food contact according to CFR Title 21 & 1935/2004 / EC

Application:

• Carbon dioxide
  Fermentation air
  Ventilation of tanks
  technical gases

More on:
http://ultrafilter.ro/wp-content/uploads/2017/04/(P)-PF-PP.pdf

The (P)-PF-PT filter element is an absolute rated, pleated high performance PTFE membrane filter. It provides the greatest assurance of filtration performance, stability and durability against chemicals even under severe process conditions.
The PTFE filter medium is inherently hydrophobic with a highly porous membrane structure. This ensures high flow rates and a high absorption of
particles during the entire service life time. The end caps and the PTFE membrane are thermally welded without the use of binders. This results in an integral filter cartridge which provides maximum durability range against chemicals with
minimal extractables.

The absolute rated (P)-PF-PT membrane filter is designed and developed for the
following applications:

Purification of chemicals
• Highly concentrated Acids
• Highly concentrated Bases
• Oxidizing reagents
• Complexing agents
• Alcohols, Aldehydes
• Etchants
• Chlorinated and fluorinated solvents
• Esters and Ketones
• Photolithographic Liquids

Filtration of air and gases
• Compressed Air
• Fermentation Air
• Tank Ventilation
• Technical Gases

This extremely durable design maintains consistent porosity and impurity retention throughout its service life without shedding or unloading contaminations.
All components meet the EU and USA requirements for Food Contact Use in
accordance with CFR (Code of Federal Regulations) Title 21 and 1935/2004/EC. (P)- PF-PT has passed the USP Class VI tests for plastics. The filter element is manufactured in accordance with the manufacturing requirements, has no migration of filter media, is non-fibre releasing and is thermally welded
without the use of binders or other chemical additives.

More on:
http://ultrafilter.ro/wp-content/uploads/2017/04/(P)-PF-PT.pdf

The P-BE filter is a depth filter with external and internal support and terminals made of stainless steel. The retention level is 99.999% related to 0.2μm. The borosilicate filter medium has a three-dimensional structure with an empty space of 95%. This ensures a large capacity for contamination at low pressure drop and flow rate. The filter medium is hydrophobic.

Filter elements in which no fiber release occurs are produced in accordance with the FDA approval requirements for food contact according to CFR (Code of Federal Regulations) Sterile P-BE filter elements ensure safe and reproducible production.

Application:

• • Air and gas filtration
    Ventilation of tanks
    Compressed air
    Carbon dioxide
    Fermentation air
    technical gases

More on:
Element filtacyjny typ (P)-BE (EN)

The (P)-GSL N filter consists of a regenerable pleated stainless-steel filter matrix in a stainlesssteel cartridge. The retention rate extends from 1 μm to 25 μm.

The (P)-GSL N filter retains contaminants, such as particles, abrasion of valves and sealings as well as rust. An improved steam quality ensures longer
service life of the filters to be sterilized and increases the efficiency of the entire process. The (P)-GSL N filter element offers the possibility of a particularly economic filtration, since the filter medium can be regenerated by ultrasonic bath or by back-flushing. This is especially essential at high particle loads. The pleated stainless-steel filter matrix ensures a very low differential pressure even at high contamination loads.

The heavy-duty construction of the (P)-GSL N filter is designed to withstand a maximum differential pressure up to 10 bar. The filter may also be used in a temperature range of -20°C up to 210°C for the filtration of air, gases or liquids.
For temperatures higher than 180°C special ORings are required.

All components of the version with welded end caps meet the USA requirements for Food Contact Use in accordance with CFR (Code of Federal Regulations) Title 21 and the EU requirements for Food Contact use according to
EC/1935/2004. The filter element is manufactured in accordance with the
manufacturing requirements, has no migration of filter media and is non-fibre releasing

Adventages:

• High retention capacity at high differential pressure and high flows
  Regenerable when rinsing in the opposite direction to the flow or using ultrasound
  Excellent durability of steam material and aggressive media
  Up to 0.01 μm with saturated pairs
  Confirmed intended use for food contact according to CFR Title 21 & 1935/2004 / EC

Applications:

• Filtration and gases
  Ventilation of tanks
  Compressed air
  Carbon dioxide
  Nitrogen
  Gases highly aggressive

More on:
https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/emea/liquids/filter-elements/p-gsl-n/eng/P-GSL-N-Sterile-Air-Steam-Liquid-Filter-Elements.pdf

The (P)-GS VE filter consists of a regenerable weldless filter pipe made from sintered stainless steel. The retention rate extends from 1 μm to 25 μm.

The (P)-GS VE filter retains contaminants, such as particles, abrasion of valves and sealings as well as rust. An improved steam quality ensures longer service life of the filters to be sterilized and increases the efficiency of the entire process. The
(P)-GS VE filter element offers the possibility of a particularly economic filtration since the filter medium can be regenerated by ultrasonic bath or by back-flushing. This is especially essential at high particle loads. The porosity level is more
than 50 % which ensures high particle and dirt holding as well as a good flow rate at a low differential pressure.

The heavy-duty construction of the (P)-GS VE filter is designed to withstand a maximum differential pressure up to 5 bar. The filter may also be used in a temperature range of –20 °C up to 210 °C.

Adventages:

• Excellent resistance to steam and aggressive media
• Regeneration by countercurrent rinsing or using an ultrasonic cleaner
  High efficiency of pollution capture with low pressure drop and high flow
  Pore size up to 0.01 μm for food pair
  For air and steam filtration
  Approved for contact with food in accordance with CFR Title 21 & 1935/2004 / EC

Applications:

• • Filtration and gases
    Ventilation of tanks
    Compressed air
    Carbon dioxide
    Nitrogen
    Gases highly aggressive

More on:
https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/emea/steam/filter-elements/p-gs-ve/f119035/eng/P-GS-VE-Steam-Filter-Elements.pdf

• Size of the cartridge –  30/3
  Connection type UF slip-in connector
  Model PT N
  Type of medium to be filtered. PTFE diaphragm
  Maximum working temperature: 82 ° C (180 F)
  Sterile: 0.2 micron efficiency
  Diameter :70 mm (2.76 inch)
  Length: 752 mm (29.61 inch)
  Materials according to EC1935 2004 Yes
  Materials comply with FDA CFR Title 21 Yes
  Closure material Polypropylene
  O-ring material of the EPDM insert
  Polypropylene inner core material
  Polypropylene outer core material

The (P)-GS N filter consists of a regenerable pleated stainless steel filter matrix in a stainless steel cartridge. The retention rate extends from 1 μm to 25 μm.

The (P)-GS N filter retains contaminants, such as particles, abrasion of valves and sealings as well as rust. An improved steam quality ensures longer service life of the filters to be sterilized and increases the efficiency of the entire process. The
(P)-GS N filter element offers the possibility of a particularly economic filtration, since the filter medium can be regenerated by ultrasonic bath or by back-flushing. This is especially essential at high particle loads. The pleated stainless steel filter matrix ensures a very low differential pressure even at high contamination loads.

The heavy-duty construction of the (P)-GS N filter is designed to withstand a maximum differential pressure up to 5 bar. The filter may also be used in a temperature range of –20°C up to 210°C for the filtration of air, gases or liquids

All components of the version with welded end caps meet the USA requirements for Food Contact Use in accordance with CFR (Code of Federal Regulations) Title 21. For applications without requirement of FDA approval, a costeffective version with plastic steel potting is available. The filter element is manufactured in accordance with the manufacturing requirements, has no migration of filter media and is non-fibre releasing.

Advantages:

• Large capacity for contamination at low differential pressure and high flow
  Regenerable when rinsing in the opposite direction to flow or using ultrasound
  Excellent durability of steam material and aggressive media
  Up to 0.01 μm with saturated pairs
  Welded version approved for application with food contact according to CFR Title 21 & 1935/2004 / EC

Applications:

• Filtracja pary
  • Breweries
    • Pharmaceutical industry
    • Food and beverage
    • Aseptic packaging
    • Electronic industry
    • Dairy industry
    • Plastic industry

More on:
https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/emea/steam/filter-elements/p-gs-n/f119034/eng/P-GS-N-Steam-Filter-Elements.pdf

The (P) -GSL N filter consists of a regenerable, pleated stainless steel matrix in a stainless steel cartridge. The range of the retention index ranges from 1μm to 25μm.

Advantages:

Filter down to 0.01 µm in air/saturated steam
• Pleated, stainless steel media
• Low pressure drop
• Regenerable by back-flushing or ultrasonic
cleaning
• Double O-Ring
• Higher flow rates at a low pressure drop
• Energy savings allow for reduced operating costs
• Longer service life which leads to a lower cost
of ownership

Applications:
• Beverage
• Dairy
• Chemical
• Pharmaceutical
• Fermentation

More on:
https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/north-america/liquids/filter-elements/p-gsl-n/f117012-eng/P-GSL-N-Sterile-Air-Steam-Liquid.pdf

The (P)-GS VE filter consists of a regenerable weldless filter pipe made from sintered stainless steel. The retention rate extends from 1 μm to 25 μm.

The (P)-GS VE filter retains contaminants, such as particles, abrasion of valves and sealings as well as rust. An improved steam quality ensures longer service life of the filters to be sterilized and increases the efficiency of the entire process. The
(P)-GS VE filter element offers the possibility of a particularly economic filtration since the filter medium can be regenerated by ultrasonic bath or by back-flushing. This is especially essential at high particle loads. The porosity level is more
than 50 % which ensures high particle and dirt holding as well as a good flow rate at a low differential pressure.

The heavy-duty construction of the (P)-GS VE filter is designed to withstand a maximum differential pressure up to 5 bar. The filter may also be used in a temperature range of –20 °C up to 210 °C.

Advantages:

• Excellent resistance to steam and aggressive media
  Regeneration by countercurrent rinsing or using an ultrasonic cleaner
  High efficiency of pollution capture with low pressure drop and high flow
  Pore size up to 0.01 μm for food pair
  For air and steam filtration
  Approved for contact with food in accordance with CFR Title 21 & 1935/2004 / EC

Applications:

• • Breweries
    • Chemical industry
    • Pharmaceutical industry
    • Food and beverage
    • Aseptic packaging
    • Electronic industry
    • Dairy industry
    • Plastic industry

More on:
https://www.donaldson.com/content/dam/donaldson/compressed-air-and-process/literature/emea/steam/filter-elements/p-gs-ve/f119035/eng/P-GS-VE-Steam-Filter-Elements.pdf

Donaldson Ultrafilter one way capsule filters are ready-to-use units for critical
applications and for the filtration of small volume flows of gases and liquids.
The filter unit consists of a durable polypropylene housing and is available
with various filter media and with various pore sizes. The housings are thermally
sealed, all materials correspond to the FDA requirements and are suitable for
food contact. These filter elements have passed the toxicologic tests according to USP XX Class VI Plastic and can be sterilized several times in an autoclave.
All filters have two ports for venting and draining and are available with different
connections

The Donaldson Ultrafilter one way capsule
filter UFTD is used by the following industries as contamination control at the point
of use:
• Pharmaceutical industry
• Chemical industry
• Biotechnology
• Electronics
• Cosmetics
• Food and beverages
• Varnishes and inks

More on :
file:///C:/Users/Kinga/Downloads/UFTD_GB%20(1).pdf